Universal, such as Custom Turbo, Supercharger charge piping set up, custom compressor, inlet for turbocharged and supercharged cars, vehicles, boats etc. AEMs 340LPH High Flow In-Tank Fuel Pump is designed for high performance naturally aspirated and forced induction EFI vehicles. It delivers reliable performance and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps. The AEM 340LPH High Flow In-Tank Fuel Pump (PN 50-1000) flows 340 lph (84 gph) at 40 PSI and is capable of supporting over 1,000 HP at 43 PSI.
Please see the flow curves and current draw vs. Fuel pressure graphs on the specs tab for more information.
This fuel pump is designed for in-tank mounting for use with gasoline and features a compact 39mm diameter that fits most applications. It has an offset inlet design that eases installations and includes a wiring harness, pre filter, internal fuel hose and clamps, end cap and rubber buffer sleeve.Every pump is tested to flow 340 lph at 40 PSI before it is packaged for sale. Designed for high output naturally aspirated and forced induction EFI vehicles. 39mm diameter fits most applications. Offset inlet design eases installation. Kit includes fuel pump, rubber sleeve and end caps, pre filter, hose, clamps and flying lead.
External Materials: Black plated steel. Inlet Fitting: 7.7mm ID, 11.0mm OD. Outlet Fitting: 8 mm hose clamp. Impeller Design: Single Scroll Hard Anodized Aluminum Turbine. Item Weight: 1.06 pounds.
Package Dimensions: 5.5 x 2.8 x 2.8 inches. Connector Terminal: 6 mm Spade (pos/neg). Min Voltage Input: 6 volts.
Max Voltage Input: 18 volts. Current Draw (40 psi): 12 amps (13.5v). Current Draw (80 psi): 15 amps (13.5v).Fuse: 15 amps (13.5v), 20 amps (13.5v) MAX. AEM fuel pumps include a universal pre filter which may not fit certain vehicle applications. Please refer to the OEM recommendations for filter replacement for your vehicle.
Your vehicles factory fuel pump wiring may not be adequate enough to handle the current draw of AEMs High Flow Fuel Pumps. Please refer to the Electrical Requirements section in the instructions document for proper wiring.AEM does not condone or approve of the modification of a tank to accommodate a High Flow Fuel Pump and cannot guarantee the pumps performance or operation if any modifications are made. These charges are the buyers responsibility. We are located in City of Industry, CA. Answers will be responded to within.
Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's your fault.
The item "AEM 340LPH 50-1000 40 PSI HIGH PERFORMANCE IN-TANK FUEL PUMP UNIVERSAL ASSEMBLY" is in sale since Wednesday, November 28, 2018. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Pumps". The seller is "heavyweightchampion" and is located in Hacienda Heights, California. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, Gibraltar, Guadeloupe, Iceland, Jordan, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.